Page 10 - ZSi-Foster-Beta-Hydraulic-Clamps
P. 10

 (2) Push Bottom Half of Clamp Onto Plate
– 10 –
www.zsi-foster.com
Connected.Simply Beta Hydraulic ClampsTM
INSTALLATION ON WELD PLATES
ZSI weld plates are available for the following Series:
• Standard-Series • Heavy-Series
• Twin-Series
• Beta Adapters
For best alignment of ZSI clamps we recommend that you mark their location before welding.
INSTALLATION ON MOUNTING RAILS
ZSI mounting rails can be used with the following Series:
• Standard-Series
• Heavy-Series (Group H3 to H6) • Twin-Series
• Beta Adapters
ZSI mounting rails are available in two different height sizes and are either welded or bolted to the supporting construction.
For Standard-Series and Twin-Series insert hexa- gon rail nut and turn to lock. For Heavy-Series slide in rail nut.
INSTALLATION ON Z-STRUT CHANNEL
The Z-Strut Nuts can be used with any clamp using a 1⁄4-20 mounting bolt. This includes:
• Standard-Series
• Twin-Series (T1 Only) • Beta Rubber Inserts
(1) Insert Z-Strut Nuts Into Z-Strut Channel And Turn to Lock
(2) Push Bottom Half
of Clamp Onto Z-Strut Nuts
(4) Add Top Cushion
(1) Weld Plate to Supporting Steel
(1) Insert Appropriate Rail Nut and Turn to Lock
(5) Add Top Plate and Bolt Into Position
(5) Add Top Plate and Bolt Into Position
Installation On Weld Plates
• Weld metal welding plates to a weight adjusted base.
• Clip lower half of clamp on to welding plate and insert tube; then add second clamp-half, cover plate, and tighten with screws provided.
• DO NOT weld with plastic clamp in position.
• After assembly the two clamp halves MUST
NOT come into contact with each other.
(5) Add Top Plate and Bolt Into Position
(3) Install Pipe
(2) Push Bottom Half of Clamp Onto Plate
(4) Add Top Cushion
NOTE: The rail nut will slide within the rail so clamp units can be adjusted before being firmly bolted.
NOTE: The Z-Strut Nut will slide within the Z-Strut Channel so clamp units can be adjusted before being firmly bolted.
(3) Install Pipe
(4) Add Top Cushion
(3) Install Pipe























































   8   9   10   11   12