Page 105 - ZSi-Foster-Product-Catalog
P. 105

  W5631 - W5634
Channel Brackets Standard Finish: Electro Galvanized (EG)
2"
1⁄4" Plate
6mm
51mm
     Part No.
    A
   Wt. Lbs/C
 Design Uniform Load Lbs. (kN)
 W200
  W210
   W5631
  6" (152mm)
 150 (68 Kg)
 1,200 (5.34 kN)
  800 (13.56 kN)
   W5632
  12" (305mm)
 250 (113.3 Kg)
 600 (2.67 kN)
  400 (1.78 kN)
   W5633
   18" (457mm)
  350 (158.7 Kg)
  400 (1.78 kN)
   270 (1.20 kN)
   W5634
  24" (610mm)
 450 (204.1 Kg)
   300 (1.33 kN)
  200 (0.89 kN)
   Design Uniform Load when attached to listed upright column. When installed in inverted position use 60% of loads shown. Safety Factor 2-1⁄2
      31⁄2"
89mm
   15⁄8"
  41mm
    A
15⁄8"
   51mm
41mm
 W5635 - W5638
2"
      1⁄4" 6mm Plate
         Part No.
    A
   Wt. Lbs/C
 Design Uniform Load Lbs. (kN)
 W200
  W210
   W5635
   6" (152mm)
  150 (68 Kg)
  1,200 (5.34 kN)
   800 (3.56 kN)
   W5636
 12" (305mm)
250 (113.3 Kg)
  600 (2.67 kN)
 400 (1.78 kN)
   W5637
  18" (457mm)
 350 (158.7 Kg)
 400 (1.78 kN)
  270 (1.20 kN)
   W5638
   24" (610mm)
  450 (204.1 Kg)
  300 (1.33 kN)
   200 (0.89 kN)
   Design Uniform Load when attached to listed upright column. When installed in inverted position use 60% of loads shown. Safety Factor 2-1⁄2
     31⁄2"
     89mm
        15⁄8"
              41mm
                    A
15⁄8"
    41mm
 W5641 - W5642
   1⁄4"
    6mm
  Part No.
    A
   Wt. Lbs/C
 Design Uniform Load Lbs. (kN)
 W200
  W210
   W5641
  6" (152mm)
 190 (86.1 Kg)
 1600 (7.12 kN)
  1,200 (5.34 kN)
   W5642
   12" (305mm)
  290 (131.5 Kg)
  800 (3.56 kN)
   600 (2.67 kN)
   Design Uniform Load when attached to listed upright column. Do not install in inverted position.
Safety Factor 2-1⁄2
  31⁄2"
89mm
    15⁄8"
  41mm
         13⁄16"
A
 21mm
15⁄8"
41mm
 Note: When brackets are used for mechanical supports, load capacities should conform to American Standard Code for Pressure Piping.
ZSi-Foster Engineering Catalog
– 105 –
                 Technical Gamma Rooftop Concrete Beta Clamps Loop & Ring Spring Electrical Pipe & Conduit General Channel Nuts Channel Introduction Data Pads Supports Inserts & Z-Clamps Clamps Steel Fittings Supports Fittings & Hardware
   103   104   105   106   107