Page 119 - ZSi-Foster-Product-Catalog
P. 119

Beam Clamps Standard Finish: Electro Galvanized
   W5712
Off-Set Beam Clamp
W5713
One-Hole Beam Clamp
1⁄2" x 11⁄2" Cone point Set Screw Included
Clamp Requires
1⁄2" x 11⁄2"
Hex Head Cap Screw and 1⁄3" Channel
Nut Not Included.
(Use in Pairs)
    1"
1⁄2"
25mm
13mm
   3⁄8"
   10mm
              (Use in Pairs)     31⁄4"
17⁄8"
1⁄4"
 83mm
48mm
6mm
   Part No.
   Wt. Lbs/C
 Design Load Lbs. (kN)
 W200 1-5⁄8" x 1-5⁄8"
  W500 1-5⁄8" x 13⁄16"
   W5712
   65 (129.4 Kg)
   600 (2.67 kN)
   500 (2.22 kN)
   Part No.
   Wt. Lbs/C
 Design Load Lbs. (kN)
 W200 1-5⁄8" x 1-5⁄8"
  W500 1-5⁄8" x 13⁄16"
   W5713
   30 (13.6Kg)
   600 (2.67 kN)
   500 (2.22 kN)
    W5714
Two-Hole Beam Clamp
Cone Point Set Screw Included
7⁄8"
22mm
15⁄8"
41mm
3⁄8"
10mm
2 Holes 9⁄16" Dia.
W5717
Channel Thick Flange Beam Clamp
       Cone Point Set Screw Included
                                                     11⁄4"
                   (Use in Pairs)
32mm
21⁄8"
              11⁄2"
38mm
3⁄8"
54mm
 (Use in Pairs)
10mm
11⁄4"
 32mm
 Part No.
   Wt. Lbs/C
 Design Load Lbs. (kN)
  W5714
  90 (40.8 Kg)
   500 (2.22 kN)
  Part No.
   Wt. Lbs/C
 Design Load Lbs. (kN)
  W5714
  83 (37.6 Kg)
   900 (4.00 kN)
   ZSi-Foster Engineering Catalog
– 119 –
                 Technical Gamma Rooftop Concrete Beta Clamps Loop & Ring Spring Electrical Pipe & Conduit General Channel Nuts Channel Introduction Data Pads Supports Inserts & Z-Clamps Clamps Steel Fittings Supports Fittings & Hardware


















   117   118   119   120   121