Page 159 - ZSi-Foster-Engineering-Catalog
P. 159

 Cush-A-StripTM
• Manufactured from a thermoplastic elastomer, Cush-A-Strip is designed for use from -50°F to 275°F.
• Easy Stocking – Packaged in 20 foot rolls in an E-Z dispenser box for convenience in handling and storage. Cush-A-Strip roll part number is S-716
• Easy Measuring – Marked in 1⁄4" increments for fast measuring and cutting, while eliminating waste.
• Lock-lip edges ensure that Cush-A-Strip will remain in place with a balanced grip.
• Clamps ordered separately. They are available with a standard bolt and nylon lock nut in steel (electro-dichromate), and stainless steel, in sizes ranging from 1⁄4" tube to 6" pipe.
Cush-A-StripTM
        Cush-A-StripTM Cutting Guide
   Clamp Part No.
    Dimensions (Inches)
  Gold Plated Steel
Stainless Steel Type 304
 Clamp Size O.D.
  Tube Size O.D.
  Pipe Size (Nom.)
  Cutting Schedule
   N008C
  NS008
    1⁄2"
   1 ⁄4"
   –
   7⁄8"
   N010C
NS010
  5⁄8"
 3⁄8"
 –
 1-1⁄8"
   N012C
 NS012
 3 ⁄4"
  1⁄2"
  1 ⁄4"
  1-1⁄2"
   N014C
 NS014
 7⁄8"
  5⁄8"
  3⁄8"
  2"
   N016C
  NS016
  1"
   3 ⁄4"
   –
   2-1 ⁄4"
   N018C
NS018
  1-1⁄8"
 7⁄8"
 1⁄2"
 3"
   N020C
 NS020
 1-1 ⁄4"
  1"
  3 ⁄4"
  3-1 ⁄4"
   N022C
 NS022
 1-3⁄8"
  1-1⁄8"
  –
  3-5 ⁄8"
   N024C
  NS024
  1-1⁄2"
   1-3 ⁄16"
   –
   3-7⁄8"
   N024C
NS024
  1-1⁄2"
 1-1 ⁄4"
 1"
 4"
   N026C
 NS026
 1-5⁄8"
  1-3⁄8"
  –
  4-1⁄2"
   N028C
 NS028
 1-3 ⁄4"
  1-1⁄2"
  –
  4-7⁄8"
   N030C
  CS030
  1-7⁄8"
   1-5⁄8"
   1-1 ⁄4"
   5-1⁄4"
   N032C
CS032
  2"
 1-3 ⁄4"
  5-1⁄2"
   N034C
 CS034
 2-1⁄8"
  1-7⁄8"
  1-1⁄2"
  6"
   N036C
 CS036
 2-1 ⁄4"
  2"
  –
  6-3 ⁄8"
   N038C
  CS038
  2-3⁄8"
   2-1⁄8"
   –
   6-3 ⁄4"
   N040C
CS040
  2-1⁄2"
 2-1 ⁄4"
 –
 7-1⁄4"
   N042C
 CS042
 2-5⁄8"
  2-3⁄8"
  2"
  7-1⁄2"
   N044C
 CS044
 2-3 ⁄4"
  2-1⁄2"
  –
  8"
   N048C
  CS048
  3"
   2-3 ⁄4"
   –
   8-3 ⁄4"
   N050C
CS050
  3-1⁄8"
 2-7⁄8"
 2-1⁄2"
 9-1⁄4"
   N054C
 CS054
 3-1 ⁄4"
  3"
  –
  9-1⁄2"
   N060C
 CS060
 3-3 ⁄4"
  3-1⁄2"
  3"
  11"
   N068C
  CS068
  4-1 ⁄4"
   4"
   3-1⁄2"
   12-1 ⁄4"
   N076C
CS076
  4-3 ⁄4"
 4-1⁄2"
 4"
 14"
   N092C
 CS092
 5-3⁄4"
  –
  5"
  15-1⁄2"
   N110C
  CS110
    6-7⁄8"
   –
   6"
   18-1⁄2"
   * Gold Plated Steel Clamps Supplied with Fixed Stud and Nylon Lock Nut
* Stainless Steel Clamps Supplied with fixed Stud and Nylon Lock Nut from 1⁄2" through 1-3 ⁄4" Sizes and 1-7⁄8" through 6-7⁄8" Sizes are supplied with a Loose Bolt and Hex Nut
   Lock-lip Edge Compression Ribs
(1) Cut appropriate length strip using the cutting schedule shown on right.
(2) Place the pipe on the Cush-A-Strip
(3) Insert the clamps in the strut
(4) Tighten the clamps.
Varies up to 0.23" 6mm
                 1.62"
     ZSi-Foster Engineering Catalog
– 159 –
41mm
 WARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
                 Technical Gamma Rooftop Concrete Beta Clamps Loop & Ring Spring Electrical Pipe & Conduit General Channel Nuts Channel Introduction Data Pads Supports Inserts & Z-Clamps Clamps Steel Fittings Supports Fittings & Hardware
   157   158   159   160   161