Page 169 - ZSi-Foster-Product-Catalog
P. 169

 Stabilizer
Typical Pipe Line
Snap-A-Saddle Pro Multi Saddle
Part Number
SASMSTAB1050G SASMSTAB1250G
D
R5.13 R6.13
Compatible Only with Saddle
SASM1050G SASM1250G
Typical Pipe Line
Weight Each (Lbs)
0.20 (0.09kg) 0.22 (0.10kg)
Snap-A-Saddle Pro Multi Saddle
Box Quantity
72
Floor Adapter
Snap-A-Saddle Pro MultiTM - Adapters Adaptable Insulated Pipe Saddle
Technical Gamma Rooftop Concrete Beta Clamps Loop & Ring Spring Electrical Pipe & Conduit General Channel Nuts Channel Introduction Data Pads Supports Inserts & Z-Clamps Clamps Steel Fittings Supports Fittings & Hardware
D
2.10" (53mm) B
B
10.34" (263mm) 11.38" (289mm)
E
Stabilizer is attached to Saddle with Strut Mount, Steel Angle, H & I-Beam and Clevis Mount adapters.
The use of this Stabilizer Adapter with 10" SASM1050G and 12" SASM1250G Saddles is suggested for additional support.
10.42" (265mm) 8.5" (216mm)
4.25"
(108mm)
Ø 0.28" (7mm) Thru
Stabilizer Floor Mount
Floor Mount works with 10" SASM1050G and 12" SASM1250G Saddles Requires the Stabilizer and Clevis Mount Adapters as shown in photo to the right.
Part Number
SASMFLOOR10-12G
Compatible Only with Saddle
SASM1050G & SASM1250G
Requires a Stabilizer
SASMSTAB1050G & SASMSTAB1250G
Requires a Clevis Mount
SASMCLEVISG
Weight Box
ZSi-Foster Engineering Catalog
– 169 –
0.75"
(19mm)
Clevis Mount Adapter
is used to attach Floor Mount & Stabilizer to Saddle.
3"
(76mm)
E
2.24" (57mm) 2.28" (58mm)
Mount to attach stabilizer to Saddle not shown.
Stabilizer
Each (Lbs)
Quantity
0.15 (0.07kg) 180












































   167   168   169   170   171