Page 225 - ZSi-Foster-Engineering-Catalog
P. 225

Z–Clamp - Standard
  Z-CLAMP
Inside Hole Clamp Units Multiple Line Clamping System
The standard Z-Clamp unit features an anchor bolt between each of the adapter inserts.
The junction adapter provides break points in lines allowing for shorter hose and tubing runs reducing leaks at connection points by securing the adapter against vibration within the Z-Clamp units. These break points may also serve as securely clamped changeover points between hose and tube, and vice versa.
• Stackable for space conservation
• Maintains consistent center line dimensions between lines both horizontally and vertically (in a stacking application)
• Mix and match pipe, tube, hose and junction adapters
• Suited for all types of hydraulic applications
• Available in standard and outside hole mounting configurations
INSTALLATION - Refer to page 267 for complete installation guide.
Note: Adapters and Hardware are ordered separately. Please see pages 227 - 230 for selection of these items.
ZSi-Foster Engineering Catalog
A CB
B
E
F
H
Double Metal Thickness
                               R
                           G (Bolt Holes, Between Holes Only)
                             Part No.
  # Adapter Holes
    # Bolts
  A
    B
  C
    E
   F
  G
   H
  R
   HAC1 Series 11⁄2" 14 Gauge
  HAC1-2
 2
 1
  2.938"
(75mm)
 1.5"
(38mm)
  0.719"
(18mm)
 0.75"
(19mm)
  1.469"
(37mm)
 0.344"
(9mm)
     0.550"
(14mm)
            0.422"
(11mm)
         HAC1-3
 3
 2
  4.406"
(112mm)
 0.719"
(18mm)
 1.469"
(37mm)
  HAC1-4
 4
 3
  5.940"
(151mm)
 0.719"
(18mm)
 1.469"
(37mm)
  HAC1-5
 5
 4
  7.140"
(181mm)
 0.594"
(15mm)
 1.343"
(34mm)
  HAC1-6
 6
 5
  8.938"
(227mm)
 0.719"
(18mm)
 1.469"
(37mm)
  HAC1-7
 7
 6
  10.188"
(259mm)
 0.594"
(15mm)
 1.343"
(34mm)
  HAC1-32
  32
  31
   48.000"
(1219mm)
  -
  -
   HAC2 Series 2" 14 Gauge
  HAC2-2
 2
 1
  3.875"
(98 mm)
 2"
(51 mm)
  0.938"
(24 mm)
 1"
(25mm)
  1.938"
(49 mm)
 0.344"
(9mm)
     0.550"
(14mm)
            0.594"
(15 mm)
         HAC2-3
 3
 2
  5.641"
(143 mm)
 0.844"
(22 mm)
 1.844"
(47 mm)
  HAC2-4
 4
 3
  7.891"
(200 mm)
 0.938"
(24 mm)
 1.938"
(49 mm)
  HAC2-5
  5
  4
   9.672"
(246 mm)
  0.844"
(22 mm)
  1.844"
(47 mm)
  HAC2-6
 6
  5
 11.672"
(296 mm)
  0.813"
(21 mm)
  1.813"
(46 mm)
  HAC2-7
 7
 6
  13.625"
(346 mm)
 0.813"
(21 mm)
 1.813"
(46 mm)
  HAC2-24
  24
  23
   48.000"
(1219mm)
  -
  -
   HAC3 Series 3" 11 Gauge
  HAC3-2
 2
 1
  6.766"
(172 mm)
 3"
(76 mm)
  1.875"
(48 mm)
 1.5"
(38 mm)
  3.375"
(86 mm)
 0.406"
(10 mm)
    0.750"
(19 mm)
          1.063"
(27 mm)
         HAC3-3
 3
 2
  8.703"
(221 mm)
 1.406"
(36 mm)
 2.984"
(76 mm)
  HAC3-4
 4
 3
  11.703"
(297 mm)
 1.406"
(36 mm)
 2.797"
(71 mm)
  HAC3-5
 5
 4
  14.703"
(373 mm)
 1.406"
(36 mm)
 2.859"
(73 mm)
  HAC3-6
 6
 5
  17.703"
(450 mm)
 1.406"
(36 mm)
 2.859"
(73 mm)
  HAC3-16
  16
  15
   48.000"
(1219 mm)
  -
  -
   NOTE: Hardware & Adapters not included.
             – 225 –
 WARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
                 Technical Gamma Rooftop Concrete Beta Clamps Loop & Ring Spring Electrical Pipe & Conduit General Channel Nuts Channel Introduction Data Pads Supports Inserts & Z-Clamps Clamps Steel Fittings Supports Fittings & Hardware
   223   224   225   226   227