Page 231 - ZSi-Foster-Engineering-Catalog
P. 231

  Concrete Inserts
               Foster
ZSi
     Channel Finish Specifications
  Finish
  Finish Code
  Description
  Paint-Green Powder Coating
   GR
  A dark green low gloss powder coating is applied and thoroughly baked after steel has been cleaned and phosphatized.
  Electroplated
   EG
  Wesanco fittings and hardware supplied as "Electro-Galvanized" in accordance with ASTM B 633.
  Mill-Galvanized (Pre-Galvanized)
   PG
  Galvanized steel used in the manufacture of Wesanco channel sections conforms to ASTM A 653 GR33 G90. Uncoated edges resulted from slitting, punching and channel cut off are present.
  Hot Dip Galvanized After Fabrication
  HG
 Wesanco channel and fittings which are hot dip galvanized after fabrication conform to one of the following specifications.
ASTM A 123, ASTM A153 or ASTM A386.
  Special Coatings
  PL, GOLD
   Other commercially available finishes can be supplied per specification when required to protect applications.
   Channel Material Specifications
       Material
Material Code
ASTM Designation
ASTM Description
         Hot Rolled: Channel
Use Finish Code
A 1011SS GR33
Hot rolled carbon steel sheet and strip, structural quality.
        Cold Rolled: Channel
A 1008SS GR33
Cold rolled carbon sheet steel.
       Stainless Steel: Channel
ST304
A 240 TYPE 304
Heat resisting chromium and chromium-nickel stainless steel plate, sheet, strip for pressure vessel.
     ST316
A 240 TYPE 316
         Aluminum: Channel
AL
B 221 TYPE 6063 T6
Aluminum alloy extruded bar, rod,
wire, shape and tube.
     Call ZSi-Foster at (800) 323-7053 or order now at zsi-foster.com
  



















































   229   230   231   232   233