Page 267 - ZSi-Foster-Engineering-Catalog
P. 267

 Z-Clamp & Beta Adapter Installation
Installation of Z-Clamps
Z-Clamps are installed in much the same manner as Beta Clamps. The weld studs are welded onto exiting structure and the clamp assembled onto them.
Installation of Beta Adapter
Beta Adapters are installed in much the same manner as Beta Clamps. The weld plate is welded onto existing structure and the Beta cushion and adapter is assembled onto it.
Technical Gamma Rooftop Concrete Beta Clamps Loop & Ring Spring Electrical Pipe & Conduit General Channel Nuts Channel Introduction Data Pads Supports Inserts & Z-Clamps Clamps Steel Fittings Supports Fittings & Hardware
(2) Place the lower Z-Clamp Frame Onto the Studs
Z-Clamp & Beta Adapter Optional Adapters
FEMALE JUNCTION O-RING FACE SEAL ADAPTER
(5) Add Top Plate and Bolt into Position
37° FLARE MALE JUNCTION ADAPTER
RUBBER SPLIT BUSHINGS
ZSi-Foster Engineering Catalog
– 267 –
(1) Weld Studs to Supporting Steel
(1) Weld Plate to Supporting Steel
(3) Attach the Stacking Bolts to the Frame and then Insert the Desired Adapters
(2) Push Bottom Half of Clamp Onto Plate
(4) Add Top Cushion
(4) Bolt Top Frame Onto
the Bottom to Secure Assembly
(3) Insert the Desired Adapter













































































   265   266   267   268   269