Page 320 - ZSi-Foster-Engineering-Catalog
P. 320

Safety Vent Series
Zero Pressure Connect and Disconnect Design
        Steel
Protective Covered (PC) Body
Fully Protective Covered (PC)
Fully Protective Covered (PC) w/Strain Relief
                 Foster SV and SVPC Series Safety Vent couplings are designed for maximum user and equipment safety. Foster SV and SVPC Series couplings allow for safe and easy connection/disconnection under zero line pressure to minimize the possibility of inadvertent disconnection and potential hose whip.
The fully encapsulated non-marring models significantly reduce the risk of surface nicks and scratches. Ideal for use in paint booth applications or for air lines used around finished surfaces, such as fiberglass, painted metal or glass surfaces.
Features:
• Made in the USA
• Rubber or polyurethane hose connections available
• Extra thick heat-treated steel walls extend service life
• Zero pressure connect/disconnect design vents down stream pressure for safe, easy connect/disconnect. It also minimizes possible inadvertent disconnection and potentially dangerous hose whip
• "O-ring" plug seal for leak-free performance
• No valve, spring, or washer that could block flow of air.
• Silicone-free assembly.
• Meets ISO 4414, 9.6 Quick-Action Couplings requirements:
Quick-Action (quick release) couplings shall be selected so that when they are coupled or uncoupled
a) the coupling shall not be forced apart in a hazardous manner
b) compressed air particles shall not be expelled in a hazardous manner
c) a controlled pressure-release system shall be provided where a hazard may exist.
– 320 –
Specifications:
Material: Zinc-plated steel, Acetal Copolymer outside cover,
Steel internals
Seal: Buna-N
Working Pressure: 300 PSIG; vacuum to 26"Hg
Body Sizes: 1⁄4" to 3⁄4" Industrial Interchange Design
Connection Sizes: 1⁄4" to 1" NPT; 1⁄4" to 3⁄4" Hose Barb
Interchangeability: Complies with ANSI/NFPA T3.20.14-1990, IS0 6150-B, & ISO 4414
Rated Pressure: 300 psig
Temperature Range (std seals): 0° to +150° F Locking Device: Stainless Steel Balls
Force required to Connect: Less than 10 lbs
Performance:
"SV","SVPC" Series (1⁄4", 3⁄8",1⁄2", 3⁄4") Pressure Drop/Flow Performance Curves @ 100 PSIG Inlet
200 100
10 1
PC = Protective Cover
10 100 PRESSURE DROP (psi)
www.zsi-foster.com
   1/2" Body
 3/4" Body
 3/8" Body
 1/4" Body
 WARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
 AIR FLOW (SCFM) Standard Cubic Flow/Minute





















































   318   319   320   321   322