Page 374 - ZSi-Foster-Engineering-Catalog
P. 374

Swivel Fittings
  Foster Swivel Fittings improve maneuverability and ergonomics when using air tools and spray guns. Functioning like a universal joint, swivel fittings allow the hose to remain vertical at all times, which reduces operator fatigue, repetitive motion trauma, and fitting chafe. The non-marring series (plastic encapsulated) is ideal for applications where non-marring and scratch reduction is needed.
Features:
• Steel body (1⁄4" and 3⁄8"),
Aluminum body (1⁄2")
• High flow capacity, low pressure drop
• More sizes for simplified plumbing
• Plastic encapsulation (non-marring Series)
– 374 –
Benefits:
• Swivels 360 degrees in two independent planes
• Allows air hose to hang straight down when used with air tools
• Reduces operator fatigue
• Reduces the possibility of carpal tunnel syndrome • Increases air hose life.
Materials of Construction:
• Body: Brass, plated steel or aluminum with plastic covering
• Seals: Buna N
              Part No.
      FPT x MPT
   Max. Working Pressure
  Desc.
 25US90
        1⁄4" x 1⁄4"
 300 psig
   Brass
  25US90-101
   Brass, w/Viton Seal
   When used with percussion tools, a minimum of 18" of hose between tool and swivel is required.
                Part No.
      FPT x MPT
  Max. Working Pressure
  Desc.
 190040
   3⁄8" x 1⁄4"
  150 psig
   Steel/ Aluminum with Plastic Covering
    190041
  3⁄8" x 3⁄8"
   190042
   1⁄2" x 1⁄2"
   When used with percussion tools, a minimum of 18" of hose between tool and swivel is required.
                   Part No.
      FPT x MPT
  Max. Working Pressure
  Desc.
 25US
   1⁄4" x 1⁄4"
  300 psig
    Brass/Steel
   38US
 3⁄8" x 3⁄8"
 50US
  1⁄2" x 1⁄2"
   When used with percussion tools, a minimum of 18" of hose between tool and swivel is required.
                    Part No.
      FPT x MPT
  Max. Working Pressure
  Desc.
 190026A
   1⁄4" x 1⁄4"
  150 psig
     Steel/ Aluminum
    190029A
 3⁄8" x 1⁄4"
 190027A
 3⁄8" x 3⁄8"
 190028
  1⁄2" x 1⁄2"
   Without Plastic Covering
When used with percussion tools, a minimum of 18" of hose between tool and swivel is required.
              Part No.
       FPT x MPT
   Max. Working Pressure
  Desc.
 25US36
      1⁄4" x 1⁄4"
  300 psig
  Brass/Steel
   When used with percussion tools, a minimum of 18" of hose between tool and swivel is required.
              Part No.
       Size
  Max. Working Pressure
 2STF2-SWVL
      1 ⁄4"
  4,000 psig
   • Used on Power Washers
• Get to those hard to reach places without bending or
being a contortionist!
                  Part No.
      FPT x MPT
  Max. Working Pressure
  Desc.
 190010A
   3⁄8" x 1⁄4"
  150 psig
   Steel/ Aluminum with Plastic Covering
    190011A
 3⁄8" x 3⁄8"
 190012
  1⁄2" x 1⁄2"
   When used with percussion tools, a minimum of 18" of hose between tool and swivel is required.
   Brand - Designates   =Foster or
=Breco Part
www.zsi-foster.com
 WARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
 Brand
Brand
Brand
Brand
Brand
Brand
Brand
Non-Marring Brass / Steel Dual
Male to Female Pipe
90° Swivel
Dual Swivel
Swivel
Brass 3 Position Swivel Tip Nozzle
Standard Swivel
Non-Marring Dual Swivel
   372   373   374   375   376